PIKE ARMS® M110™ 22LR MUZZLE BRAKE - FLASH HIDER
- SLIP-ON MOUNTING
- FOR RUGER® 10/22® BULL BARRELS
- BILLET CNC PRECISION MACHINED
BIG BORE CANNON LOOK & FEEL... NOW FOR YOUR 10/22® RIFLE!
When the Pike Arms® M22/50 "50 Cal" Brake is not enough, we offer our M110™ CANNON Muzzle Brake / Flash Hider for your bull / target / .920 Barrel Ruger® 10/22® rifle. This is not a toy! Now you can get a serious big bore muzzle brake for your Ruger® 10/22® rifle at a previously unheard of price due to our volume production manufacturing capability. The Pike Arms® M110™ Muzzle Brake / Flash Hider is precision machined from aircraft grade aluminum and professionally anodized for maximum lightweight strength and durability. It completely eliminates any flash and directs muzzle gasses away from the shooter and at angles away from the target.
The Pike Arms® M110™ Cannon Muzzle Brake / Flash Hider is easily installed on target / bull / .920 / heavy barrel Ruger® 10/22® rifles in less than a minute without the need for any special adapter, coupling or barrel threading by utilizing a pair of locking set screws on the bottom of the brake. The required installation allen wrench is included with the muzzle brake.
To match and compliment your rifle, the M110™ Muzzle Brake / Flash Hider is available in a variety of finishes, please specify when ordering. This is the 10/22® accessory that you need and that your shooting buddies will REALLY notice... Order one today!
Overall Rating: 5 out of 5 3 reviews
Frequently Asked Questions For
PIKE ARMS® *ANODIZED* M110™
22LR MUZZLE BRAKE / FLASH HIDER
- SLIP-ON MOUNTING
- FOR RUGER® 10/22® BULL BARRELS
- BILLET CNC PRECISION MACHINED
| PIKE ARMS® M110™ MUZZLE BRAKE INSTALLATION INSTRUCTIONS |
Installation is quick and easy. No tools are required other than the supplied allen wrench.
1. Ensure that your rifle is not loaded. Remove magazine. Retract bolt and visually verify that the chamber is emply.
2. Using the supplied allen wrench, loosen the attaching set screws that are located on the bottom of the muzzle brake. It is not necessary to completely remove them. Unscrew them far enough that they do not protrude into the inside of the muzzle brake.
3. Slide the muzzle brake over the muzzle of the barrel while ensuring that the locking screws are at the exact bottom of the barrel so the brake is correctly orientated. The muzzle brake is designed to be a snug fit. Due to the manufacturing tolerance of the factory Ruger® barrels, the muzzle brake will often require a slight hit with the palm of your hand to fully seat it. DO NOT use a hammer or similar to hit the muzzle brake. You will damage the muzzle brake which would not be covered by any manufacturing warranty. Please note that although the Flash Hider is a slip fit installation on most bull barrels, due to the considerable tolerance variations at the muzzle from one factory barrel to the next, in some cases it may be necessary to do some minimal fitting in order to get the correct light press fit on your barrel.
4. Once the muzzle brake is seated flushly on the barrel, use the supplied allen wrench to loosly tighten the two set screws. Once both are lightly attached to the barrel, secure each a little tighter. Use caution not to over torque the two set screws so much as to strip the threads out of the muzzle brake.
Installation is complete and is ready for use.
WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
